3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project.
6 # All text after a double hash (##) is considered a comment and is placed in
7 # front of the TAG it is preceding.
9 # All text after a single hash (#) is considered a comment and will be ignored.
11 # TAG = value [value, ...]
12 # For lists, items can also be appended using:
13 # TAG += value [value, ...]
14 # Values that contain spaces should be placed between quotes (\" \").
16 #---------------------------------------------------------------------------
17 # Project related configuration options
18 #---------------------------------------------------------------------------
20 # This tag specifies the encoding used for all characters in the config file
21 # that follow. The default is UTF-8 which is also the encoding used for all text
22 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
23 # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
24 # for the list of possible encodings.
25 # The default value is: UTF-8.
27 DOXYFILE_ENCODING = UTF-8
29 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
30 # double-quotes, unless you are using Doxywizard) that should identify the
31 # project for which the documentation is generated. This name is used in the
32 # title of most generated pages and in a few other places.
33 # The default value is: My Project.
37 # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
38 # could be handy for archiving the generated documentation or if some version
39 # control system is used.
43 # Using the PROJECT_BRIEF tag one can provide an optional one line description
44 # for a project that appears at the top of each page and should give viewer a
45 # quick idea about the purpose of the project. Keep the description short.
49 # With the PROJECT_LOGO tag one can specify a logo or an icon that is included
50 # in the documentation. The maximum height of the logo should not exceed 55
51 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
52 # the logo to the output directory.
54 PROJECT_LOGO = D:/Source/G-Truc/
glm/doc/logo.png
56 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
57 # into which the generated documentation will be written. If a relative path is
58 # entered, it will be relative to the location where doxygen was started. If
59 # left blank the current directory will be used.
63 # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
64 # directories (in 2 levels) under the output directory of each output format and
65 # will distribute the generated files over these directories. Enabling this
66 # option can be useful when feeding doxygen a huge amount of source files, where
67 # putting all generated files in the same directory would otherwise causes
68 # performance problems for the file system.
69 # The default value is: NO.
73 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
74 # characters to appear in the names of generated files. If set to NO, non-ASCII
75 # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
77 # The default value is: NO.
79 ALLOW_UNICODE_NAMES = NO
81 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
82 # documentation generated by doxygen is written. Doxygen will use this
83 # information to generate all constant output in the proper language.
84 # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
85 # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
86 # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
87 # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
88 # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
89 # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
90 # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
91 # Ukrainian and Vietnamese.
92 # The default value is: English.
94 OUTPUT_LANGUAGE = English
96 # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
97 # descriptions after the members that are listed in the file and class
98 # documentation (similar to Javadoc). Set to NO to disable this.
99 # The default value is: YES.
101 BRIEF_MEMBER_DESC = NO
103 # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
104 # description of a member or function before the detailed description
106 # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
107 # brief descriptions will be completely suppressed.
108 # The default value is: YES.
112 # This tag implements a quasi-intelligent brief description abbreviator that is
113 # used to form the text in various listings. Each string in this list, if found
114 # as the leading text of the brief description, will be stripped from the text
115 # and the result, after processing the whole list, is used as the annotated
116 # text. Otherwise, the brief description is used as-is. If left blank, the
117 # following values are used ($name is automatically replaced with the name of
118 # the entity):The $name class, The $name widget, The $name file, is, provides,
119 # specifies, contains, represents, a, an and the.
121 ABBREVIATE_BRIEF =
"The $name class " \
122 "The $name widget " \
133 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
134 # doxygen will generate a detailed section even if there is only a brief
136 # The default value is: NO.
138 ALWAYS_DETAILED_SEC = NO
140 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
141 # inherited members of a class in the documentation of that class as if those
142 # members were ordinary class members. Constructors, destructors and assignment
143 # operators of the base classes will not be shown.
144 # The default value is: NO.
146 INLINE_INHERITED_MEMB = NO
148 # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
149 # before files name in the file list and in the header files. If set to NO the
150 # shortest path that makes the file name unique will be used
151 # The default value is: YES.
155 # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
156 # Stripping is only done if one of the specified strings matches the left-hand
157 # part of the path. The tag can be used to show relative paths in the file list.
158 # If left blank the directory from which doxygen is run is used as the path to
161 # Note that you can specify absolute paths here, but also relative paths, which
162 # will be relative from the directory where doxygen is started.
163 # This tag requires that the tag FULL_PATH_NAMES is set to YES.
165 STRIP_FROM_PATH =
"C:/Documents and Settings/Groove/ "
167 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
168 # path mentioned in the documentation of a class, which tells the reader which
169 # header file to include in order to use a class. If left blank only the name of
170 # the header file containing the class definition is used. Otherwise one should
171 # specify the list of include paths that are normally passed to the compiler
174 STRIP_FROM_INC_PATH =
176 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
177 # less readable) file names. This can be useful is your file systems doesn't
178 # support long names like on DOS, Mac, or CD-ROM.
179 # The default value is: NO.
183 # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
184 # first line (until the first dot) of a Javadoc-style comment as the brief
185 # description. If set to NO, the Javadoc-style will behave just like regular Qt-
186 # style comments (thus requiring an explicit @brief command for a brief
188 # The default value is: NO.
190 JAVADOC_AUTOBRIEF = YES
192 # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
193 # line (until the first dot) of a Qt-style comment as the brief description. If
194 # set to NO, the Qt-style will behave just like regular Qt-style comments (thus
195 # requiring an explicit \brief command for a brief description.)
196 # The default value is: NO.
200 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
201 # multi-line C++ special comment block (i.e. a block of
202 # a brief description. This used to be the default behavior. The new default is
203 # to treat a multi-line C++ comment block as a detailed description. Set this
204 # tag to YES if you prefer the old behavior instead.
206 # Note that setting this tag to YES also means that rational rose comments are
207 # not recognized any more.
208 # The default value is: NO.
210 MULTILINE_CPP_IS_BRIEF = NO
212 # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
213 # documentation from any documented member that it re-implements.
214 # The default value is: YES.
218 # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
219 # page for each member. If set to NO, the documentation of a member will be part
220 # of the file/class/namespace that contains it.
221 # The default value is: NO.
223 SEPARATE_MEMBER_PAGES = NO
225 # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
226 # uses this value to replace tabs by spaces in code fragments.
227 # Minimum value: 1, maximum value: 16, default value: 4.
231 # This tag can be used to specify a number of aliases that act as commands in
232 # the documentation. An alias has the form:
235 # "sideeffect=@par Side Effects:\n"
236 # will allow you to put the command \sideeffect (or @sideeffect) in the
237 # documentation, which will result in a user-defined paragraph with heading
238 # "Side Effects:". You can put \n's in the value part of an alias to insert
243 # This tag can be used to specify a number of word-keyword mappings (TCL only).
244 # A mapping has the form "name=value". For example adding "class=itcl::class"
245 # will allow you to use the command class in the itcl::class meaning.
249 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
250 # only. Doxygen will then generate output that is more tailored for C. For
251 # instance, some of the names that are used will be different. The list of all
252 # members will be omitted, etc.
253 # The default value is: NO.
255 OPTIMIZE_OUTPUT_FOR_C = NO
257 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
258 # Python sources only. Doxygen will then generate output that is more tailored
259 # for that language. For instance, namespaces will be presented as packages,
260 # qualified scopes will look different, etc.
261 # The default value is: NO.
263 OPTIMIZE_OUTPUT_JAVA = NO
265 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
266 # sources. Doxygen will then generate output that is tailored for Fortran.
267 # The default value is: NO.
269 OPTIMIZE_FOR_FORTRAN = NO
271 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
272 # sources. Doxygen will then generate output that is tailored for VHDL.
273 # The default value is: NO.
275 OPTIMIZE_OUTPUT_VHDL = NO
277 # Doxygen selects the parser to use depending on the extension of the files it
278 # parses. With this tag you can assign which parser to use for a given
279 # extension. Doxygen has a built-in mapping, but you can override or extend it
280 # using this tag. The format is ext=language, where ext is a file extension, and
281 # language is one of the parsers supported by doxygen: IDL, Java, Javascript,
282 # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
283 # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
284 # Fortran. In the later case the parser tries to guess whether the code is fixed
285 # or free formatted code, this is the default for Fortran type files), VHDL. For
286 # instance to make doxygen treat .inc files as Fortran files (default is PHP),
287 # and .f files as C (default is Fortran), use: inc=Fortran f=C.
289 # Note: For files without extension you can use no_extension as a placeholder.
291 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
292 # the files are not read by doxygen.
296 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
297 # according to the Markdown format, which allows for more readable
298 # documentation. See http://daringfireball.net/projects/markdown/ for details.
299 # The output of markdown processing is further processed by doxygen, so you can
300 # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
301 # case of backward compatibilities issues.
302 # The default value is: YES.
304 MARKDOWN_SUPPORT = YES
306 # When enabled doxygen tries to link words that correspond to documented
307 # classes, or namespaces to their corresponding documentation. Such a link can
308 # be prevented in individual cases by putting a % sign in front of the word or
309 # globally by setting AUTOLINK_SUPPORT to NO.
310 # The default value is: YES.
312 AUTOLINK_SUPPORT = YES
314 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
315 # to include (a tag file for) the STL sources as input, then you should set this
316 # tag to YES in order to let doxygen match functions declarations and
317 # definitions whose arguments contain STL classes (e.g. func(std::string);
318 # versus func(std::string) {}). This also make the inheritance and collaboration
319 # diagrams that involve STL classes more complete and accurate.
320 # The default value is: NO.
322 BUILTIN_STL_SUPPORT = NO
324 # If you use Microsoft's C++/CLI language, you should set this option to YES to
325 # enable parsing support.
326 # The default value is: NO.
330 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
331 # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
332 # will parse them like normal C++ but will assume all classes use public instead
333 # of private inheritance when no explicit protection keyword is present.
334 # The default value is: NO.
338 # For Microsoft's IDL there are propget and propput attributes to indicate
339 # getter and setter methods for a property. Setting this option to YES will make
340 # doxygen to replace the get and set methods by a property in the documentation.
341 # This will only work if the methods are indeed getting or setting a simple
342 # type. If this is not the case, or you want to show the methods anyway, you
343 # should set this option to NO.
344 # The default value is: YES.
346 IDL_PROPERTY_SUPPORT = YES
348 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
349 # tag is set to YES then doxygen will reuse the documentation of the first
350 # member in the group (if any) for the other members of the group. By default
351 # all members of a group must be documented explicitly.
352 # The default value is: NO.
354 DISTRIBUTE_GROUP_DOC = NO
356 # If one adds a struct or class to a group and this option is enabled, then also
357 # any nested class or struct is added to the same group. By default this option
358 # is disabled and one has to add nested compounds explicitly via \ingroup.
359 # The default value is: NO.
361 GROUP_NESTED_COMPOUNDS = NO
363 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
364 # (for instance a group of public functions) to be put as a subgroup of that
365 # type (e.g. under the Public Functions section). Set it to NO to prevent
366 # subgrouping. Alternatively, this can be done per class using the
367 # \nosubgrouping command.
368 # The default value is: YES.
372 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
373 # are shown inside the group in which they are included (e.g. using \ingroup)
374 # instead of on a separate page (for HTML and Man pages) or section (for LaTeX
377 # Note that this feature does not work in combination with
378 # SEPARATE_MEMBER_PAGES.
379 # The default value is: NO.
381 INLINE_GROUPED_CLASSES = NO
383 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
384 # with only public data fields or simple typedef fields will be shown inline in
385 # the documentation of the scope in which they are defined (i.e. file,
386 # namespace, or group documentation), provided this scope is documented. If set
387 # to NO, structs, classes, and unions are shown on a separate page (for HTML and
388 # Man pages) or section (for LaTeX and RTF).
389 # The default value is: NO.
391 INLINE_SIMPLE_STRUCTS = NO
393 # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
394 # enum is documented as struct, union, or enum with the name of the typedef. So
395 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
396 # with name TypeT. When disabled the typedef will appear as a member of a file,
397 # namespace, or class. And the struct will be named TypeS. This can typically be
398 # useful for C code in case the coding convention dictates that all compound
399 # types are typedef'ed and only the typedef is referenced, never the tag name.
400 # The default value is: NO.
402 TYPEDEF_HIDES_STRUCT = NO
404 # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
405 # cache is used to resolve symbols given their name and scope. Since this can be
406 # an expensive process and often the same symbol appears multiple times in the
407 # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
408 # doxygen will become slower. If the cache is too large, memory is wasted. The
409 # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
410 # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
411 # symbols. At the end of a run doxygen will report the cache usage and suggest
412 # the optimal cache size from a speed point of view.
413 # Minimum value: 0, maximum value: 9, default value: 0.
415 LOOKUP_CACHE_SIZE = 0
417 #---------------------------------------------------------------------------
418 # Build related configuration options
419 #---------------------------------------------------------------------------
421 # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
422 # documentation are documented, even if no documentation was available. Private
423 # class members and static file members will be hidden unless the
424 # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
425 # Note: This will also disable the warnings about undocumented members that are
426 # normally produced when WARNINGS is set to YES.
427 # The default value is: NO.
431 # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
432 # be included in the documentation.
433 # The default value is: NO.
437 # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
438 # scope will be included in the documentation.
439 # The default value is: NO.
443 # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
444 # included in the documentation.
445 # The default value is: NO.
449 # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
450 # locally in source files will be included in the documentation. If set to NO,
451 # only classes defined in header files are included. Does not have any effect
453 # The default value is: YES.
455 EXTRACT_LOCAL_CLASSES = NO
457 # This flag is only useful for Objective-C code. If set to YES, local methods,
458 # which are defined in the implementation section but not in the interface are
459 # included in the documentation. If set to NO, only methods in the interface are
461 # The default value is: NO.
463 EXTRACT_LOCAL_METHODS = NO
465 # If this flag is set to YES, the members of anonymous namespaces will be
466 # extracted and appear in the documentation as a namespace called
467 # 'anonymous_namespace{file}', where file will be replaced with the base name of
468 # the file that contains the anonymous namespace. By default anonymous namespace
470 # The default value is: NO.
472 EXTRACT_ANON_NSPACES = NO
474 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
475 # undocumented members inside documented classes or files. If set to NO these
476 # members will be included in the various overviews, but no documentation
477 # section is generated. This option has no effect if EXTRACT_ALL is enabled.
478 # The default value is: NO.
480 HIDE_UNDOC_MEMBERS = YES
482 # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
483 # undocumented classes that are normally visible in the class hierarchy. If set
484 # to NO, these classes will be included in the various overviews. This option
485 # has no effect if EXTRACT_ALL is enabled.
486 # The default value is: NO.
488 HIDE_UNDOC_CLASSES = YES
490 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
491 # (class|struct|union) declarations. If set to NO, these declarations will be
492 # included in the documentation.
493 # The default value is: NO.
495 HIDE_FRIEND_COMPOUNDS = YES
497 # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
498 # documentation blocks found inside the body of a function. If set to NO, these
499 # blocks will be appended to the function's detailed documentation block.
500 # The default value is: NO.
502 HIDE_IN_BODY_DOCS = YES
504 # The INTERNAL_DOCS tag determines if documentation that is typed after a
505 # \internal command is included. If the tag is set to NO then the documentation
506 # will be excluded. Set it to YES to include the internal documentation.
507 # The default value is: NO.
511 # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
512 # names in lower-case letters. If set to YES, upper-case letters are also
513 # allowed. This is useful if you have classes or files whose names only differ
514 # in case and if your file system supports case sensitive file names. Windows
515 # and Mac users are advised to set this option to NO.
516 # The default value is: system dependent.
518 CASE_SENSE_NAMES = YES
520 # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
521 # their full class and namespace scopes in the documentation. If set to YES, the
522 # scope will be hidden.
523 # The default value is: NO.
525 HIDE_SCOPE_NAMES = YES
527 # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
528 # append additional text to a page's title, such as Class Reference. If set to
529 # YES the compound reference will be hidden.
530 # The default value is: NO.
532 HIDE_COMPOUND_REFERENCE= NO
534 # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
535 # the files that are included by a file in the documentation of that file.
536 # The default value is: YES.
538 SHOW_INCLUDE_FILES = NO
540 # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
541 # grouped member an include statement to the documentation, telling the reader
542 # which file to include in order to use the member.
543 # The default value is: NO.
545 SHOW_GROUPED_MEMB_INC = NO
547 # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
548 # files with double quotes in the documentation rather than with sharp brackets.
549 # The default value is: NO.
551 FORCE_LOCAL_INCLUDES = NO
553 # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
554 # documentation for inline members.
555 # The default value is: YES.
559 # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
560 # (detailed) documentation of file and class members alphabetically by member
561 # name. If set to NO, the members will appear in declaration order.
562 # The default value is: YES.
564 SORT_MEMBER_DOCS = YES
566 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
567 # descriptions of file, namespace and class members alphabetically by member
568 # name. If set to NO, the members will appear in declaration order. Note that
569 # this will also influence the order of the classes in the class list.
570 # The default value is: NO.
572 SORT_BRIEF_DOCS = YES
574 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
575 # (brief and detailed) documentation of class members so that constructors and
576 # destructors are listed first. If set to NO the constructors will appear in the
577 # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
578 # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
579 # member documentation.
580 # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
581 # detailed member documentation.
582 # The default value is: NO.
584 SORT_MEMBERS_CTORS_1ST = NO
586 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
587 # of group names into alphabetical order. If set to NO the group names will
588 # appear in their defined order.
589 # The default value is: NO.
591 SORT_GROUP_NAMES = NO
593 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
594 # fully-qualified names, including namespaces. If set to NO, the class list will
595 # be sorted only by class name, not including the namespace part.
596 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
597 # Note: This option applies only to the class list, not to the alphabetical
599 # The default value is: NO.
601 SORT_BY_SCOPE_NAME = YES
603 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
604 # type resolution of all parameters of a function it will reject a match between
605 # the prototype and the implementation of a member function even if there is
606 # only one candidate or it is obvious which candidate to choose by doing a
607 # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
608 # accept a match between prototype and implementation in such cases.
609 # The default value is: NO.
611 STRICT_PROTO_MATCHING = NO
613 # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
614 # list. This list is created by putting \todo commands in the documentation.
615 # The default value is: YES.
617 GENERATE_TODOLIST = YES
619 # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
620 # list. This list is created by putting \test commands in the documentation.
621 # The default value is: YES.
623 GENERATE_TESTLIST = YES
625 # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
626 # list. This list is created by putting \bug commands in the documentation.
627 # The default value is: YES.
629 GENERATE_BUGLIST = YES
631 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
632 # the deprecated list. This list is created by putting \deprecated commands in
634 # The default value is: YES.
636 GENERATE_DEPRECATEDLIST= YES
638 # The ENABLED_SECTIONS tag can be used to enable conditional documentation
639 # sections, marked by \if <section_label> ... \endif and \cond <section_label>
640 # ... \endcond blocks.
644 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
645 # initial value of a variable or macro / define can have for it to appear in the
646 # documentation. If the initializer consists of more lines than specified here
647 # it will be hidden. Use a value of 0 to hide initializers completely. The
648 # appearance of the value of individual variables and macros / defines can be
649 # controlled using \showinitializer or \hideinitializer command in the
650 # documentation regardless of this setting.
651 # Minimum value: 0, maximum value: 10000, default value: 30.
653 MAX_INITIALIZER_LINES = 30
655 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
656 # the bottom of the documentation of classes and structs. If set to YES, the
657 # list will mention the files that were used to generate the documentation.
658 # The default value is: YES.
662 # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
663 # will remove the Files entry from the Quick Index and from the Folder Tree View
665 # The default value is: YES.
669 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
670 # page. This will remove the Namespaces entry from the Quick Index and from the
671 # Folder Tree View (if specified).
672 # The default value is: YES.
674 SHOW_NAMESPACES = YES
676 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
677 # doxygen should invoke to get the current version for each file (typically from
678 # the version control system). Doxygen will invoke the program by executing (via
679 # popen()) the command command input-file, where command is the value of the
680 # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
681 # by doxygen. Whatever the program writes to standard output is used as the file
682 # version. For an example see the documentation.
684 FILE_VERSION_FILTER =
686 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
687 # by doxygen. The layout file controls the global structure of the generated
688 # output files in an output format independent way. To create the layout file
689 # that represents doxygen's defaults, run doxygen with the -l option. You can
690 # optionally specify a file name after the option, if omitted DoxygenLayout.xml
691 # will be used as the name of the layout file.
693 # Note that if you run doxygen from a directory containing a file called
694 # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
699 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
700 # the reference definitions. This must be a list of .bib files. The .bib
701 # extension is automatically appended if omitted. This requires the bibtex tool
702 # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
703 # For LaTeX the style of the bibliography can be controlled using
704 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
705 # search path. See also \cite for info how to create references.
709 #---------------------------------------------------------------------------
710 # Configuration options related to warning and progress messages
711 #---------------------------------------------------------------------------
713 # The QUIET tag can be used to turn on/off the messages that are generated to
714 # standard output by doxygen. If QUIET is set to YES this implies that the
716 # The default value is: NO.
720 # The WARNINGS tag can be used to turn on/off the warning messages that are
721 # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
722 # this implies that the warnings are on.
724 # Tip: Turn warnings on while writing the documentation.
725 # The default value is: YES.
729 # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
730 # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
731 # will automatically be disabled.
732 # The default value is: YES.
734 WARN_IF_UNDOCUMENTED = YES
736 # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
737 # potential errors in the documentation, such as not documenting some parameters
738 # in a documented function, or documenting parameters that don't exist or using
739 # markup commands wrongly.
740 # The default value is: YES.
742 WARN_IF_DOC_ERROR = YES
744 # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
745 # are documented, but have no documentation for their parameters or return
746 # value. If set to NO, doxygen will only warn about wrong or incomplete
747 # parameter documentation, but not about the absence of documentation.
748 # The default value is: NO.
750 WARN_NO_PARAMDOC = NO
752 # The WARN_FORMAT tag determines the format of the warning messages that doxygen
753 # can produce. The string should contain the $file, $line, and $text tags, which
754 # will be replaced by the file and line number from which the warning originated
755 # and the warning text. Optionally the format may contain $version, which will
756 # be replaced by the version of the file (if it could be obtained via
757 # FILE_VERSION_FILTER)
758 # The default value is: $file:$line: $text.
760 WARN_FORMAT =
"$file:$line: $text"
762 # The WARN_LOGFILE tag can be used to specify a file to which warning and error
763 # messages should be written. If left blank the output is written to standard
768 #---------------------------------------------------------------------------
769 # Configuration options related to the input files
770 #---------------------------------------------------------------------------
772 # The INPUT tag is used to specify the files and/or directories that contain
773 # documented source files. You may enter file names like myfile.cpp or
774 # directories like /usr/src/myproject. Separate the files or directories with
775 # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
776 # Note: If this tag is empty the current directory is searched.
781 # This tag can be used to specify the character encoding of the source files
782 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
783 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
784 # documentation (see: http://www.gnu.org/software/libiconv) for the list of
785 # possible encodings.
786 # The default value is: UTF-8.
788 INPUT_ENCODING = UTF-8
790 # If the value of the INPUT tag contains directories, you can use the
791 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
792 # *.h) to filter out the source-files in the directories.
794 # Note that for custom extensions or not directly supported extensions you also
795 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
798 # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
799 # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
800 # *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
801 # *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd,
802 # *.vhdl, *.ucf, *.qsf, *.as and *.js.
804 FILE_PATTERNS = *.hpp \
807 # The RECURSIVE tag can be used to specify whether or not subdirectories should
808 # be searched for input files as well.
809 # The default value is: NO.
813 # The EXCLUDE tag can be used to specify files and/or directories that should be
814 # excluded from the INPUT source files. This way you can easily exclude a
815 # subdirectory from a directory tree whose root is specified with the INPUT tag.
817 # Note that relative paths are relative to the directory from which doxygen is
822 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
823 # directories that are symbolic links (a Unix file system feature) are excluded
825 # The default value is: NO.
827 EXCLUDE_SYMLINKS = NO
829 # If the value of the INPUT tag contains directories, you can use the
830 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
831 # certain files from those directories.
833 # Note that the wildcards are matched against the file with absolute path, so to
834 # exclude all test directories for example use the pattern */test